plonk

Draw on a screenshot you already took, then copy it to the clipboard and show it to the user. Call take_screenshot first and LOOK at the image: you cannot know where anything is until you have seen it. Points are fractions 0..1 of the image, origin TOP-LEFT, so a rectangle around a left sidebar that is a seventh of the width and starts under the title bar is [{x:0,y:0.05},{x:0.14,y:1}]. Rectangle and ellipse take two opposite corners, arrow takes start then tip, pen and highlight take a run of points. Returns the marked image so you can check what you drew.

Move and resize windows to build a layout. Each item places one window: 'app' is the app name (fuzzy matched), optional 'title' filters windows of that app by title substring, optional 'screen' is the monitor index from get_state (each monitor can get its own layout — just send items with different 'screen' values; defaults to the screen the window is currently on), 'frame' is {x,y,w,h} as fractions 0..1 of that screen's visible area with origin at TOP-LEFT (left half = {x:0,y:0,w:0.5,h:1}; bottom-right quarter = {x:0.5,y:0.5,w:0.5,h:0.5}; centered 60% = {x:0.2,y:0.15,w:0.6,h:0.7}). Windows are unminimized if needed. Returns per-item success/errors.

Launch a saved workspace by name. Legacy name kept for older clients — new integrations should call launch_workspace, which adds a 'screen' option to pull the whole workspace onto one monitor. Opens every app that is not running, waits for its windows, and moves them into the saved positions; macOS cannot open an app straight into a position, so windows appear first and jump into place. Returns per-app success and reports apps that never opened a window. Takes up to a minute for a large workspace.

Assign a zone set (built-in or saved) to one monitor, so dragging a window there snaps to that set's zones. Each monitor keeps its own assignment; assigning replaces whatever that monitor used before and takes effect on the next drag. Omit 'name' to restore the default set (Halves); pass 'edge' for plain edge snapping instead of zones. Available set names and current per-monitor assignments are in get_state.

Ask Plonk whether a newer release exists, and report what is installed. Use this when the user asks what version they run, whether Plonk is up to date, or before calling install_update — which refuses unless a newer release is already on offer. The check is a network round trip to the GitHub releases API, so this returns immediately with the state as it stands and the result lands a moment later: read it back from get_state's 'update' key, or wait for an 'update' event on the change stream. If the user has turned update checks off, this fails with 409 rather than dialling out on their behalf — Plonk promises a process that only listens, and the user can still check by hand on its Updates page; report that back instead of retrying. Returns {installed, latest?, available, phase, status, automatic, notes?, page?}: 'available' is true only when 'latest' is newer than 'installed', 'phase' is idle|checking|available|downloading|verifying|installing|failed, and 'status' is a sentence fit to show the user.

Remove the rule set for an app with set_app_rule, so its new windows open wherever the app puts them again, or where its last window went when that habit is switched on in Plonk. 'app' is the pattern exactly as get_state.app_rules lists it, ignoring case. Fails when no rule matches; nothing else changes.

Delete the saved workspace with that name, whether it was saved with save_layout or save_workspace. Legacy name kept for older clients — new integrations should call delete_workspace, which does the same. Use it to clean up saved workspaces that are no longer wanted; existing names are listed in get_state.

Delete a saved workspace by name. Use this to clean up workspaces you created that are no longer wanted.

Delete a saved zone set by name. Any monitor currently using it falls back to the default set (Halves), so snapping keeps working. Only sets made with save_zone_set can go: the built-ins (Halves, Thirds, 60 / 40, Quarters, Priority) are refused. Deleting is immediate and cannot be undone — the zones would have to be described again. Saved sets and their per-monitor assignments are listed in get_state; use assign_zone_set instead when a monitor should merely stop using a set that others still need.

Read the words off the screen, or off a saved image, and return them as text. Recognition runs on the Mac itself and nothing is uploaded. Prefer this over take_screenshot whenever the answer is words rather than a picture — an error dialog, a log, a terminal, a table, text baked into an image or a paused video, a PDF page in a viewer that will not let text be selected. It costs a fraction of the tokens an image does and does not depend on reading pixels correctly. Use take_screenshot instead when layout, colour or 'what does this look like' is the question. mode 'screen' captures everything with no user interaction; 'region' and 'window' hand the user the native crosshair or window picker and wait for them, up to five minutes. Pass 'path' instead of a mode to read an image already on disk, including one take_screenshot just wrote. Returns 'text' (every line in reading order, top to bottom) and 'lines' — each with the recognized string, Vision's 0..1 'confidence', and 'box' {x,y,w,h} as fractions 0..1 of the image with origin at TOP-LEFT. Those boxes share the coordinate space annotate_screenshot draws in, so a line can be circled where it was found by passing the same path to that tool. The text is also copied to the clipboard unless 'clipboard' is false. An area with no readable text returns ok with an empty 'text' and a 'note' rather than an error.

Get the current desktop state: all screens/monitors (index, frame, visible area — coordinates have origin at top-left of the primary screen, y grows down), all open windows (app name, title, which screen it is on, absolute frame, and 'fraction' — its position as fractions 0..1 of that screen's visible area), 'zone_sets' (every set by name, each zone as {x,y,w,h} with a 'name' where the set gives it one), 'screen_zone_sets' (which set each monitor wears), saved layout names, 'app_rules' (where each app's new windows open, see set_app_rule), 'place_new_windows' and 'auto_fill_zones', whether a keep-awake session is holding, and 'disabled_features': the modules the user switched off in Plonk (zones, workspaces, shot, ruler, awake and so on). A tool belonging to one of those fails with an error saying so until the user switches it back on. ALWAYS call this first before applying a layout, to see which apps are running and how many monitors there are.

Install the release that check_for_update found: Plonk downloads the build, checks it is signed with the same certificate as the running copy, swaps the bundle in, and relaunches itself. Prefer this over telling the user to download a build by hand — the signature check is also what preserves their Accessibility and Screen Recording grants, which a hand-installed copy can lose. Ask the user before calling it: it quits the app, so any window arrangement in flight stops and the local API is unreachable for a few seconds until the new copy is up. It fails without touching the installed copy when no newer release is on offer (call check_for_update first), when the user has update checks switched off (409 — installing downloads a build, so it is bound by the same promise as the check; they can install from Plonk's Updates page), when the download does not match the release or its signature, or when Plonk.app sits somewhere the user cannot write. Returns the same shape as check_for_update plus {installing: true} once the swap has started; poll get_state afterwards to confirm the new version came up.

Launch a saved workspace: opens every app that is not running, waits for its windows, and moves them into the saved positions. Each window returns to the monitor it was captured on, so a workspace spanning several displays comes back spanning them. macOS cannot open an app straight into a position, so windows appear first and jump into place. Returns per-app success, and reports apps that never opened a window. Takes up to a minute for a large workspace.

Measure the screen in points and pixels, without taking a picture of it. Plonk photographs the screen once and walks out from the given point in all four directions until one pixel is unlike the one before it, which is where an edge is. What comes back is how far the point could travel each way: the run across and the run down. Prefer this over take_screenshot whenever the answer is a number: how wide that sidebar is, how tall that row is, how big the gap between two things is, is that tap target 44 points. An image costs far more tokens and still has to be eyeballed. Use extract_text when the answer is words, and take_screenshot when it is 'what does this look like'. Read the result honestly: these are two independent runs through one point, not the outline of an element. Inside a plain rectangle they are its width and height; inside a gap they are the gap; on a large flat background they run until something else is in the way, which may be most of the screen. When the exact bounds of a specific element matter, pass 'interactive' and let the user point at it. Three ways to ask. Pass 'point' for the runs through one place. Pass 'from' and 'to' for the straight-line distance between two places, which needs no capture at all. Pass 'interactive' to hand the user the ruler and wait up to five minutes while they measure it themselves. Points are fractions 0..1 of the screen's visible area with origin at TOP-LEFT, the same space apply_layout and save_zone_set use, so {x:0.5,y:0.5} is the middle of the screen. Returns 'points' {x,y,w,h} in screen points (absolute, origin top-left of the primary display) where w is the run across and h the run down, 'pixels' {w,h} in the display's own pixels — twice the points on a Retina screen, which is the difference that matters when checking an asset — 'fraction' {x,y,w,h} of that screen's visible area ready to hand to apply_layout, 'scale', and 'text', the same line Plonk shows the user. A distance also carries 'distance' and 'distance_pixels'. Needs macOS Screen Recording permission, the same as a screenshot; without it the call fails rather than guessing. What is measured is a still taken when the call started, so a screen that is animating measures as it was at that moment.

Save the named window arrangement as a workspace. Legacy name kept for older clients — new integrations should call save_workspace, which can also record whether running apps get moved into place. Omit 'items' to snapshot the windows exactly as they are on screen right now; pass 'items' to describe the arrangement explicitly. Saving over an existing name replaces it. Saved workspaces are listed in get_state, with their full contents.

Save a workspace: the apps of a desktop setup, where each window goes, and what each app should open. Pass 'items' to describe the arrangement, or omit them to snapshot the windows exactly as they are on screen right now. Saving over an existing name replaces it. Saved workspaces are listed in get_state, with their full contents.

Create or replace a named zone set used for drag snapping. Zones are rectangles {x,y,w,h} as fractions 0..1 of a screen's visible area, origin TOP-LEFT; each zone must stay inside the screen, but zones may overlap each other (the smallest one under the cursor wins). A zone may also carry a 'name' ('chat', 'editor'): it is drawn under the zone's number, the user can say it out loud, and snap_window takes it instead of the number; names must be unique within the set, ignoring case, and cannot be a bare number. Pass 'screen' to also assign the set to that monitor so it becomes active immediately. Pass 'gap' to give this set its own spacing around windows in points, or null to make it follow the default gap again; omitting it keeps whatever the set had. Built-in sets already exist: Halves, Thirds, 60 / 40, Quarters, Priority.

Make an agent the user's active one in Plonk. Omit 'name' to select this client itself; pass "" to clear the choice so any agent may drive. The active agent shows in Plonk's menu bar and settings, and is where voice and other outgoing requests will go. With 'exclusive' true the app also rejects window and settings changes from every other agent (they can still read state and take screenshots). Connected agents are listed in get_state under 'agents'.

Make an app's windows open into a numbered zone from now on, so an arrangement holds without anyone dragging: 'Slack always in zone 1 on the second monitor'. 'app' is matched anywhere in the app's name or bundle id, case-insensitively, the way get_state.excluded_apps entries are; a bundle id such as 'com.tinyspeck.slackmacgap' is the safest form. 'zone' is the number Plonk draws on the zone (1-based) in the set assigned to that monitor. 'screen' is a monitor index from get_state and is stored as that display's identity, so it survives a reboot renumbering the screens; omit it and the window stays on whichever screen it opened on. One rule per app: setting it again replaces the old one; a rule that names the app exactly wins over a bare-word rule. Applies to ordinary windows that open after it is set, not to windows already open (use snap_window for those) and not to dialogs or panels. An app on get_state.excluded_apps is left alone even with a rule. A rule beats the habit Plonk keeps of where an app's last window went, and both beat filling an empty zone. Current rules are get_state.app_rules. Fails when 'screen' names a monitor that is not attached or a zone that monitor's set does not have.

Keep the Mac from sleeping, and optionally keep the user shown as available in chat apps. One session with two levels, called Pulse in the app. 'available' picks the level. Left off, Plonk holds a power assertion: the Mac does not sleep, but Slack and Teams still slide the user to Away, because those read the system idle timer and an assertion does not touch it. Turned on, Plonk also resets that idle timer with a Shift keypress every two minutes, which is what keeps a chat status green — and which postpones sleep by itself, so being available always includes being awake. Use it whenever the point is how the user looks to other people rather than whether a job finishes. Three ways to end the session, in order of preference: 'pid' ends it the moment that process exits — best by far when something is running, because a build or a render knows when it is finished and nothing is left holding the machine awake afterwards; 'until' ends it at a wall-clock time ('17:00', or an ISO-8601 timestamp); 'minutes' ends it after a countdown. Give none of them and it runs until switched off, or until the user's configured default timeout expires. Switching it by hand overrides the schedule until the schedule itself next changes, so turning it off during scheduled hours lasts until those hours end rather than being undone on the next tick. Sessions Plonk starts on its own — a recurring schedule of hours and weekdays, a list of apps whose being open arms it, or the charger being plugged in — are settings on the Pulse page rather than parameters here; get_state reports all of them under 'awake_details'. Behavior also follows those settings: a session may pause on battery, so the returned 'status' is what actually happened, 'awake' is whether an assertion is held right now, and 'available' is whether a keypress is actually being posted. Those differ from what was asked for when Plonk has no Accessibility permission (nothing can be posted, though the Mac still stays awake) or when the user disallowed running on battery and the Mac is unplugged; neither is an error, since the request was understood. The menu bar cube glows while a session holds. A process-bound session is deliberately not restored if Plonk restarts, since the pid would mean nothing by then. Errors come back for a pid that is not running or a time that has already passed.

Drop one window into a zone of the snap-zone set assigned to that monitor, by number or by name. The numbers are the ones Plonk draws on the zones while a window is dragged, so 'the middle zone' of a three-zone set is 2; a name is whatever the set calls a zone ('chat'), listed per zone in get_state.zone_sets, matched ignoring case. Fails with the zones that screen does have, names included, when neither matches. Zone sets and their per-monitor assignment are in get_state; use apply_layout instead when the user describes a size rather than a zone.

Capture the screen and return the image so it can be looked at. mode 'screen' captures everything (no user interaction); mode 'app' captures one named window and needs no user interaction either — pass 'app' and/or 'title_contains', and it works even when that window is behind others, minimized excepted, without raising it or taking focus; 'region' and 'window' hand the user the native crosshair/window picker and wait for them. Prefer 'app' whenever the user asks about a particular program ("what is playing in Spotify", "read the error in Xcode") — it is the only mode that can see a window the user cannot, and it does not disturb their desktop. Set annotate=true to open Plonk's drawing editor on the capture instead of returning it — use that when the user wants to mark the shot up themselves. Optional 'path' writes to an explicit file, otherwise the configured screenshot folder is used; 'clipboard' overrides the configured copy-to-clipboard behavior. The returned image is scaled down for legibility; the file at 'path' keeps full resolution. To draw on the result, pass that 'path' to annotate_screenshot.