Amazon Simple Email Service

Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set. For information about setting up rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Creates a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Creates a configuration set event destination. When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Creates an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.

Creates a new custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Creates a new IP address filter. For information about setting up IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Creates a receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Creates an empty receipt rule set. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Deletes a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Deletes a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide. Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains.

Deletes an existing custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Deletes the specified identity (an email address or a domain) from the list of verified identities. You can execute this operation no more than once per second.

Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Deletes the specified IP address filter. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Deletes the specified receipt rule. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Deletes the specified receipt rule set and all of the receipt rules it contains. The currently active rule set cannot be deleted. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Deletes an email template. You can execute this operation no more than once per second.

Deprecated. Use the DeleteIdentity operation to delete email addresses and domains.

Returns the metadata and receipt rules for the receipt rule set that is currently active. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Returns the details of the specified configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Returns the details of the specified receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Returns the details of the specified receipt rule set. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Returns the email sending status of the Amazon SES account for the current region. You can execute this operation no more than once per second.

Returns the custom email verification template for the template name you specify. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Returns the current status of Easy DKIM signing for an entity. For domain name identities, this operation also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published. This operation takes a list of identities as input and returns the following information for each: Whether Easy DKIM signing is enabled or disabled. A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address. Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses. This operation is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time. For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Returns the custom MAIL FROM attributes for a list of identities (email addresses : domains). This operation is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.

Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes. This operation is throttled at one request per second and can only get notification attributes for up to 100 identities at a time. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.

Provides the sending limits for the Amazon SES account. You can execute this operation no more than once per second.

Provides sending statistics for the current AWS Region. The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute period of time. You can execute this operation no more than once per second.

Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify. You can execute this operation no more than once per second.

Provides a list of the configuration sets associated with your Amazon SES account in the current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide. You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.

Lists the existing custom verification email templates for your account in the current AWS Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Returns a list containing all of the identities (email addresses and domains) for your AWS account in the current AWS Region, regardless of verification status. You can execute this operation no more than once per second.

Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Lists the IP address filters associated with your AWS account in the current AWS Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Lists the receipt rule sets that exist under your AWS account in the current AWS Region. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Lists the email templates present in your Amazon SES account in the current AWS Region. You can execute this operation no more than once per second.

Deprecated. Use the ListIdentities operation to list the email addresses and domains associated with your account.

Adds or updates the delivery options for a configuration set.

Adds or updates a sending authorization policy for the specified identity (an email address or a domain). This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Reorders the receipt rules within a receipt rule set. All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it. You cannot use this API to send generic bounces for mail that was not received by Amazon SES. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Composes an email message to multiple destinations. The message body is created using an email template. In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the following requirements: The call must refer to an existing email template. You can create email templates using the CreateTemplate operation. The message must be sent from a verified email address or domain. If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide. The maximum message size is 10 MB. Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid. The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group. The number of destinations you can contact in a single call to the API may be limited by your account's maximum sending rate.

Adds an email address to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address. To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Composes an email message and immediately queues it for sending. In order to send email using the SendEmail operation, your message must meet the following requirements: The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation will result in an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide. The maximum message size is 10 MB. The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid. The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group. For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.

Composes an email message and immediately queues it for sending. This operation is more flexible than the SendEmail API operation. When you use the SendRawEmail operation, you can specify the headers of the message as well as its content. This flexibility is useful, for example, when you want to send a multipart MIME email (such a message that contains both a text and an HTML version). You can also use this operation to send messages that include attachments. The SendRawEmail operation has the following requirements: You can only send email from verified email addresses or domains. If you try to send email from an address that isn't verified, the operation results in an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you can only send email to other verified addresses in your account, or to addresses that are associated with the Amazon SES mailbox simulator. The maximum message size, including attachments, is 10 MB. Each message has to include at least one recipient address. A recipient address includes any address on the To:, CC:, or BCC: lines. If you send a single message to more than one recipient address, and one of the recipient addresses isn't in a valid format (that is, it's not in the format UserName@[SubDomain.]Domain.TopLevelDomain), Amazon SES rejects the entire message, even if the other addresses are valid. Each message can include up to 50 recipient addresses across the To:, CC:, or BCC: lines. If you need to send a single message to more than 50 recipients, you have to split the list of recipient addresses into groups of less than 50 recipients, and send separate messages to each group. Amazon SES allows you to specify 8-bit Content-Transfer-Encoding for MIME message parts. However, if Amazon SES has to modify the contents of your message (for example, if you use open and click tracking), 8-bit content isn't preserved. For this reason, we highly recommend that you encode all content that isn't 7-bit ASCII. For more information, see MIME Encoding in the Amazon SES Developer Guide. Additionally, keep the following considerations in mind when using the SendRawEmail operation: Although you can customize the message headers when using the SendRawEmail operation, Amazon SES will automatically apply its own Message-ID and Date headers; if you passed these headers when creating the message, they will be overwritten by the values that Amazon SES provides. If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email: X-SES-SOURCE-ARN X-SES-FROM-ARN X-SES-RETURN-PATH-ARN Don't include these X-headers in the DKIM signature. Amazon SES removes these before it sends the email. If you only specify the SourceIdentityArn parameter, Amazon SES sets the From and Return-Path addresses to the same identity that you specified. For more information about sending authorization, see the Using Sending Authorization with Amazon SES in the Amazon SES Developer Guide. For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.