AWS CloudFormation

Activates a public third-party extension, making it available for use in stack templates. For more information, see Using public extensions in the CloudFormation User Guide. Once you have activated a public third-party extension in your account and region, use SetTypeConfiguration to specify configuration properties for the extension. For more information, see Configuring extensions at the account level in the CloudFormation User Guide.

Returns configuration data for the specified CloudFormation extensions, from the CloudFormation registry for the account and region. For more information, see Configuring extensions at the account level in the CloudFormation User Guide.

Cancels an update on the specified stack. If the call completes successfully, the stack rolls back the update and reverts to the previous stack configuration. You can cancel only stacks that are in the UPDATE_IN_PROGRESS state.

For a specified stack that's in the UPDATE_ROLLBACK_FAILED state, continues rolling it back to the UPDATE_ROLLBACK_COMPLETE state. Depending on the cause of the failure, you can manually fix the error and continue the rollback. By continuing the rollback, you can return your stack to a working state (the UPDATE_ROLLBACK_COMPLETE state), and then try to update the stack again. A stack goes into the UPDATE_ROLLBACK_FAILED state when CloudFormation can't roll back all changes after a failed stack update. For example, you might have a stack that's rolling back to an old database instance that was deleted outside of CloudFormation. Because CloudFormation doesn't know the database was deleted, it assumes that the database instance still exists and attempts to roll back to it, causing the update rollback to fail.

Creates a list of changes that will be applied to a stack so that you can review the changes before executing them. You can create a change set for a stack that doesn't exist or an existing stack. If you create a change set for a stack that doesn't exist, the change set shows all of the resources that CloudFormation will create. If you create a change set for an existing stack, CloudFormation compares the stack's information with the information that you submit in the change set and lists the differences. Use change sets to understand which resources CloudFormation will create or change, and how it will change resources in an existing stack, before you create or update a stack. To create a change set for a stack that doesn't exist, for the ChangeSetType parameter, specify CREATE. To create a change set for an existing stack, specify UPDATE for the ChangeSetType parameter. To create a change set for an import operation, specify IMPORT for the ChangeSetType parameter. After the CreateChangeSet call successfully completes, CloudFormation starts creating the change set. To check the status of the change set or to review it, use the DescribeChangeSet action. When you are satisfied with the changes the change set will make, execute the change set by using the ExecuteChangeSet action. CloudFormation doesn't make changes until you execute the change set. To create a change set for the entire stack hierarchy, set IncludeNestedStacks to True.

Creates a stack as specified in the template. After the call completes successfully, the stack creation starts. You can check the status of the stack through the DescribeStacksoperation.

Creates stack instances for the specified accounts, within the specified Amazon Web Services Regions. A stack instance refers to a stack in a specific account and Region. You must specify at least one value for either Accounts or DeploymentTargets, and you must specify at least one value for Regions.

Creates a stack set.

Deactivates a public extension that was previously activated in this account and region. Once deactivated, an extension can't be used in any CloudFormation operation. This includes stack update operations where the stack template includes the extension, even if no updates are being made to the extension. In addition, deactivated extensions aren't automatically updated if a new version of the extension is released.

Deletes the specified change set. Deleting change sets ensures that no one executes the wrong change set. If the call successfully completes, CloudFormation successfully deleted the change set. If IncludeNestedStacks specifies True during the creation of the nested change set, then DeleteChangeSet will delete all change sets that belong to the stacks hierarchy and will also delete all change sets for nested stacks with the status of REVIEW_IN_PROGRESS.

Deletes a specified stack. Once the call completes successfully, stack deletion starts. Deleted stacks don't show up in the DescribeStacks operation if the deletion has been completed successfully.

Deletes stack instances for the specified accounts, in the specified Amazon Web Services Regions.

Deletes a stack set. Before you can delete a stack set, all its member stack instances must be deleted. For more information about how to complete this, see DeleteStackInstances.

Marks an extension or extension version as DEPRECATED in the CloudFormation registry, removing it from active use. Deprecated extensions or extension versions cannot be used in CloudFormation operations. To deregister an entire extension, you must individually deregister all active versions of that extension. If an extension has only a single active version, deregistering that version results in the extension itself being deregistered and marked as deprecated in the registry. You can't deregister the default version of an extension if there are other active version of that extension. If you do deregister the default version of an extension, the extension type itself is deregistered as well and marked as deprecated. To view the deprecation status of an extension or extension version, use DescribeType.

Retrieves your account's CloudFormation limits, such as the maximum number of stacks that you can create in your account. For more information about account limits, see CloudFormation Quotas in the CloudFormation User Guide.

Returns the inputs for the change set and a list of changes that CloudFormation will make if you execute the change set. For more information, see Updating Stacks Using Change Sets in the CloudFormation User Guide.

Returns hook-related information for the change set and a list of changes that CloudFormation makes when you run the change set.

Returns information about a CloudFormation extension publisher. If you don't supply a PublisherId, and you have registered as an extension publisher, DescribePublisher returns information about your own publisher account. For more information about registering as a publisher, see: RegisterPublisher Publishing extensions to make them available for public use in the CloudFormation CLI User Guide

Returns information about a stack drift detection operation. A stack drift detection operation detects whether a stack's actual configuration differs, or has drifted, from it's expected configuration, as defined in the stack template and any values specified as template parameters. A stack is considered to have drifted if one or more of its resources have drifted. For more information about stack and resource drift, see Detecting Unregulated Configuration Changes to Stacks and Resources. Use DetectStackDrift to initiate a stack drift detection operation. DetectStackDrift returns a StackDriftDetectionId you can use to monitor the progress of the operation using DescribeStackDriftDetectionStatus. Once the drift detection operation has completed, use DescribeStackResourceDrifts to return drift information about the stack and its resources.

Returns all stack related events for a specified stack in reverse chronological order. For more information about a stack's event history, go to Stacks in the CloudFormation User Guide. You can list events for stacks that have failed to create or have been deleted by specifying the unique stack identifier (stack ID).

Returns the stack instance that's associated with the specified stack set, Amazon Web Services account, and Region. For a list of stack instances that are associated with a specific stack set, use ListStackInstances.

Returns a description of the specified resource in the specified stack. For deleted stacks, DescribeStackResource returns resource information for up to 90 days after the stack has been deleted.

Returns drift information for the resources that have been checked for drift in the specified stack. This includes actual and expected configuration values for resources where CloudFormation detects configuration drift. For a given stack, there will be one StackResourceDrift for each stack resource that has been checked for drift. Resources that haven't yet been checked for drift aren't included. Resources that don't currently support drift detection aren't checked, and so not included. For a list of resources that support drift detection, see Resources that Support Drift Detection. Use DetectStackResourceDrift to detect drift on individual resources, or DetectStackDrift to detect drift on all supported resources for a given stack.

Returns Amazon Web Services resource descriptions for running and deleted stacks. If StackName is specified, all the associated resources that are part of the stack are returned. If PhysicalResourceId is specified, the associated resources of the stack that the resource belongs to are returned. Only the first 100 resources will be returned. If your stack has more resources than this, you should use ListStackResources instead. For deleted stacks, DescribeStackResources returns resource information for up to 90 days after the stack has been deleted. You must specify either StackName or PhysicalResourceId, but not both. In addition, you can specify LogicalResourceId to filter the returned result. For more information about resources, the LogicalResourceId and PhysicalResourceId, go to the CloudFormation User Guide. A ValidationError is returned if you specify both StackName and PhysicalResourceId in the same request.

Returns the description of the specified stack set.

Returns the description of the specified stack set operation.

Returns the description for the specified stack; if no stack name was specified, then it returns the description for all the stacks created. If the stack doesn't exist, an ValidationError is returned.

Returns detailed information about an extension that has been registered. If you specify a VersionId, DescribeType returns information about that specific extension version. Otherwise, it returns information about the default extension version.

Returns information about an extension's registration, including its current status and type and version identifiers. When you initiate a registration request using RegisterType , you can then use DescribeTypeRegistration to monitor the progress of that registration request. Once the registration request has completed, use DescribeType to return detailed information about an extension.

Detects whether a stack's actual configuration differs, or has drifted, from it's expected configuration, as defined in the stack template and any values specified as template parameters. For each resource in the stack that supports drift detection, CloudFormation compares the actual configuration of the resource with its expected template configuration. Only resource properties explicitly defined in the stack template are checked for drift. A stack is considered to have drifted if one or more of its resources differ from their expected template configurations. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources. Use DetectStackDrift to detect drift on all supported resources for a given stack, or DetectStackResourceDrift to detect drift on individual resources. For a list of stack resources that currently support drift detection, see Resources that Support Drift Detection. DetectStackDrift can take up to several minutes, depending on the number of resources contained within the stack. Use DescribeStackDriftDetectionStatus to monitor the progress of a detect stack drift operation. Once the drift detection operation has completed, use DescribeStackResourceDrifts to return drift information about the stack and its resources. When detecting drift on a stack, CloudFormation doesn't detect drift on any nested stacks belonging to that stack. Perform DetectStackDrift directly on the nested stack itself.

Returns information about whether a resource's actual configuration differs, or has drifted, from it's expected configuration, as defined in the stack template and any values specified as template parameters. This information includes actual and expected property values for resources in which CloudFormation detects drift. Only resource properties explicitly defined in the stack template are checked for drift. For more information about stack and resource drift, see Detecting Unregulated Configuration Changes to Stacks and Resources. Use DetectStackResourceDrift to detect drift on individual resources, or DetectStackDrift to detect drift on all resources in a given stack that support drift detection. Resources that don't currently support drift detection can't be checked. For a list of resources that support drift detection, see Resources that Support Drift Detection.

Detect drift on a stack set. When CloudFormation performs drift detection on a stack set, it performs drift detection on the stack associated with each stack instance in the stack set. For more information, see How CloudFormation performs drift detection on a stack set. DetectStackSetDrift returns the OperationId of the stack set drift detection operation. Use this operation id with DescribeStackSetOperation to monitor the progress of the drift detection operation. The drift detection operation may take some time, depending on the number of stack instances included in the stack set, in addition to the number of resources included in each stack. Once the operation has completed, use the following actions to return drift information: Use DescribeStackSet to return detailed information about the stack set, including detailed information about the last completed drift operation performed on the stack set. (Information about drift operations that are in progress isn't included.) Use ListStackInstances to return a list of stack instances belonging to the stack set, including the drift status and last drift time checked of each instance. Use DescribeStackInstance to return detailed information about a specific stack instance, including its drift status and last drift time checked. For more information about performing a drift detection operation on a stack set, see Detecting unmanaged changes in stack sets. You can only run a single drift detection operation on a given stack set at one time. To stop a drift detection stack set operation, use StopStackSetOperation .

Returns the estimated monthly cost of a template. The return value is an Amazon Web Services Simple Monthly Calculator URL with a query string that describes the resources required to run the template.

Updates a stack using the input information that was provided when the specified change set was created. After the call successfully completes, CloudFormation starts updating the stack. Use the DescribeStacks action to view the status of the update. When you execute a change set, CloudFormation deletes all other change sets associated with the stack because they aren't valid for the updated stack. If a stack policy is associated with the stack, CloudFormation enforces the policy during the update. You can't specify a temporary stack policy that overrides the current policy. To create a change set for the entire stack hierarchy, IncludeNestedStacks must have been set to True.

Returns the stack policy for a specified stack. If a stack doesn't have a policy, a null value is returned.

Returns the template body for a specified stack. You can get the template for running or deleted stacks. For deleted stacks, GetTemplate returns the template for up to 90 days after the stack has been deleted. If the template doesn't exist, a ValidationError is returned.

Returns information about a new or existing template. The GetTemplateSummary action is useful for viewing parameter information, such as default parameter values and parameter types, before you create or update a stack or stack set. You can use the GetTemplateSummary action when you submit a template, or you can get template information for a stack set, or a running or deleted stack. For deleted stacks, GetTemplateSummary returns the template information for up to 90 days after the stack has been deleted. If the template doesn't exist, a ValidationError is returned.

Import existing stacks into a new stack sets. Use the stack import operation to import up to 10 stacks into a new stack set in the same account as the source stack or in a different administrator account and Region, by specifying the stack ID of the stack you intend to import. ImportStacksToStackSet is only supported by self-managed permissions.

Returns the ID and status of each active change set for a stack. For example, CloudFormation lists change sets that are in the CREATE_IN_PROGRESS or CREATE_PENDING state.

Lists all exported output values in the account and Region in which you call this action. Use this action to see the exported output values that you can import into other stacks. To import values, use the Fn::ImportValue function. For more information, see CloudFormation export stack output values.

Lists all stacks that are importing an exported output value. To modify or remove an exported output value, first use this action to see which stacks are using it. To see the exported output values in your account, see ListExports. For more information about importing an exported output value, see the Fn::ImportValue function.

Returns summary information about stack instances that are associated with the specified stack set. You can filter for stack instances that are associated with a specific Amazon Web Services account name or Region, or that have a specific status.

Returns descriptions of all resources of the specified stack. For deleted stacks, ListStackResources returns resource information for up to 90 days after the stack has been deleted.

Returns summary information about the results of a stack set operation.

Returns summary information about operations performed on a stack set.

Returns summary information about stack sets that are associated with the user. [Self-managed permissions] If you set the CallAs parameter to SELF while signed in to your Amazon Web Services account, ListStackSets returns all self-managed stack sets in your Amazon Web Services account. [Service-managed permissions] If you set the CallAs parameter to SELF while signed in to the organization's management account, ListStackSets returns all stack sets in the management account. [Service-managed permissions] If you set the CallAs parameter to DELEGATED_ADMIN while signed in to your member account, ListStackSets returns all stack sets with service-managed permissions in the management account.

Returns the summary information for stacks whose status matches the specified StackStatusFilter. Summary information for stacks that have been deleted is kept for 90 days after the stack is deleted. If no StackStatusFilter is specified, summary information for all stacks is returned (including existing stacks and stacks that have been deleted).

Returns a list of registration tokens for the specified extension(s).

Returns summary information about the versions of an extension.

Returns summary information about extension that have been registered with CloudFormation.